burner accessories
Blast Tips
Small burner tips to handle combustible mixtures of air and gas under sufficient pressure to cause a blast-like flame.
Please sign in to access more documents
Once signed in, you may be able to access additional documents for your account.
Overview
This product is discontinued. We may offer firmware, drivers and manuals for your convenience, as well as online tech support. If you require additional support, please contact us using the links above.
Product Discontinuation Date:2022-12-30T00:00:00Z
Service & Support Discontinuation Date: 2027-12-31T00:00:00Z
Blast Tips are suitable for variety of applications. In general, Blast Tips are built to burn without the use of any refractory tunnel and are either self-piloting or built to prevent the flame from blowing away under normal conditions of operation. Due to the marked differences in combustion characteristics of various combustible gases, it is not always possible to use the same tip on all gases. A tip that may have good flame retention when burning coke oven gas may not hold a natural gas flame at all. They can be used in groups to heat a wide area such as the bottom of a kettle, or mounted down a length of pipe as in a core oven.
Specifications
Processing & Performance Metrics
- Capacity Range
- Ferrofix - 6,090 to 5,700,000 BTU/hr (HHV) at 6 in. wc
- Sticktite - 37,000 to 5,250,000 BTU/hr (HHV) at 6 in. wc
Applications & Compatibility
- Typical Uses
- Boilers, kilns, ovens, air heaters, furnaces, immersion heating
- Compatible Mixers
- Injectors (low/high pressure), proportional mixers, Variset® mixers
Dimensions & Size Specifications
- Sizes
- Ferrofix - 1/4 to 6 in pipe sizes
- Sticktite - 1/2 to 6 in pipe sizes
Combustion, Fuel & Mixing Sub‑Systems
- Nozzle Type
- Open‑type, flame‑retention design
- Nozzle Series
- Ferrofix, Sticktite
Pressure Specifications
- Mixture Pressure
- Rated at 6 in. wc (15 mbar)
Combustion, Mixing & Fuel Dynamics
- Mixing Method
- Used with air/gas mixing devices
Material Specifications
- Material
- Cast Iron, Steel
Fuel, Gas & Media Specifications
- Gas Type
- Natural Gas (0.6 specific gravity reference)
Ignition, Flame & Supervision Specifications
- Flame Supervision
- Suitable flame sensing and automatic fuel shutoff required
Combustion Design & Characteristics
- Combustion Block
- Not required; optional for refractory‑lined chambers
Processing & Performance Metrics
- Capacity Range
- Ferrofix - 6,090 to 5,700,000 BTU/hr (HHV) at 6 in. wc
- Sticktite - 37,000 to 5,250,000 BTU/hr (HHV) at 6 in. wc
Applications & Compatibility
- Typical Uses
- Boilers, kilns, ovens, air heaters, furnaces, immersion heating
- Compatible Mixers
- Injectors (low/high pressure), proportional mixers, Variset® mixers
Dimensions & Size Specifications
- Sizes
- Ferrofix - 1/4 to 6 in pipe sizes
- Sticktite - 1/2 to 6 in pipe sizes
Combustion, Fuel & Mixing Sub‑Systems
- Nozzle Type
- Open‑type, flame‑retention design
- Nozzle Series
- Ferrofix, Sticktite
Pressure Specifications
- Mixture Pressure
- Rated at 6 in. wc (15 mbar)
Combustion, Mixing & Fuel Dynamics
- Mixing Method
- Used with air/gas mixing devices
Material Specifications
- Material
- Cast Iron, Steel
Fuel, Gas & Media Specifications
- Gas Type
- Natural Gas (0.6 specific gravity reference)
Ignition, Flame & Supervision Specifications
- Flame Supervision
- Suitable flame sensing and automatic fuel shutoff required
Combustion Design & Characteristics
- Combustion Block
- Not required; optional for refractory‑lined chambers
- Capacity Range : Ferrofix - 6,090 to 5,700,000 BTU/hr (HHV) at 6 in. wc|Sticktite - 37,000 to 5,250,000 BTU/hr (HHV) at 6 in. wc
- Typical Uses : Boilers, kilns, ovens, air heaters, furnaces, immersion heating
- Sizes : Ferrofix - 1/4 to 6 in pipe sizes|Sticktite - 1/2 to 6 in pipe sizes
- Nozzle Type : Open‑type, flame‑retention design
- Nozzle Series : Ferrofix, Sticktite
- Mixture Pressure : Rated at 6 in. wc (15 mbar)
- Mixing Method : Used with air/gas mixing devices
- Material : Cast Iron, Steel
- Gas Type : Natural Gas (0.6 specific gravity reference)
- Flame Supervision : Suitable flame sensing and automatic fuel shutoff required
- Compatible Mixers : Injectors (low/high pressure), proportional mixers, Variset® mixers
- Combustion Block : Not required; optional for refractory‑lined chambers
Name
Description
File Size
Date
Size
Category@category|Type@type
Filters
Product Number
Please sign in to view part numbers available for purchase based on your account Sign In
Part Number
Description
Leaf Category
Thumbnail
Add to list
18902-1
NZL,STICKTITE,ST 102 10,0.5 IN.,NPT,STL
18902-1
NZL,STICKTITE,ST 102 10,0.5 IN.,NPT,STL
18902-2
NZL,STICKTITE,ST 102 A18 8 10,0.5 IN.,NP
18902-2
NZL,STICKTITE,ST 102 A18 8 10,0.5 IN.,NP
18903-1
NZL,STICKTITE,ST 103 14,0.75 IN.,NPT,STL
18903-1
NZL,STICKTITE,ST 103 14,0.75 IN.,NPT,STL
