TRAINING

Industrial Gas Metering

Aim
In this 2 day seminar, participants learn the basics of device functions and the calibration requirements for gas meter, volume converter and process gas chromatograph applications. This is important knowledge for the selection, installation and use of the devices.

Contents

• Fundamentals of gas metering and the metering chain
• Aspects of the testing agency
  
• Design of meters, volume conversion devices, rotary and turbine gas meters
• Gas meter/volume converter system
  
• Expert discussion about rotary and turbine gas meters and volume conversion devices
• Remote data transfer from volume conversion devices

Target Group
Grid Planers, engineers, officers, field service personnel , in general all people interested gas metering..

Training on request

Basics of Volume Conversion and EVC EK280/EK205

Aim
In this 2 day seminar, participants learn the basics of volume conversion and the basic handling of the main functions of compact Volume Conversion Devices EK280 and/or EK205. Parameterizations are carried out using the enSuite software.

Contents

• Fundamentals of volume conversion
• Metrological use of volume converters
• Short introduction of volume converter EK280/EK220/EK205
• Connecting components for remote data transfer
• User interface of the devices
• Interpreting and acknowledging error messages
• Battery change
• enSuite parameterization software
• Reading and visualization of process and archive data

Notes
Optional, further content on request

Target Group
Fitters from grid or meter operators. Personnel from the field of remote meter reading and billing who wish to obtain an overview of the electronic metering technology used.

Training on request

USM 1

Aim
In this 3-days seminar, participants get to know the functions and possible applications of Q.Sonic Gas Flowmeters and learn how to perform commissioning, function checks, maintenance, hardware and firmware upgrade and troubleshooting of series 6 Q.Sonic flow meter.

Contents

• Fundamental and principal of an ultrasonic metering
• Design and Structure of NGQ & Legacy ultrasonic flow meter
• Ultrasonic configuration software
• Commissioning & best practices
• Data analysis
• Troubleshooting and fault analysis
• Optimization of USM setting and tolls to use
• Firmware and hardware upgrade
• Series 6 electronic retrofit kit upgrade on legacy meter
• Configuration of an old meter

Notes

• Satety footwear is required
• A laptop with administrations rights is required (installation of the current Sonic explorer & enSuite softwares)

Target Group
Service technicians Measurement engineer Technical specialist.

Training on request

USM 2 (Experienced Users)

Aim
This 2-days seminar is intended for experience service technicians and auditors who carry out or assist tests, function checks, perform maintenance, hardware and firmware upgrade and troubleshoot of the ultrasonic flow meter.

Enable experience field personnel to perform service electronic Series VI retrofit upgrade kit, be able to analyze data and troubleshoot fault analysis on the device during commissioning.

Contents

• Fundamental and principal of an ultrasonic metering
• Design and Structure of & Legacy ultrasonic flow meter
• Series –VI Configuration (Uniform data conversion Sonic Explorer or enSuite)
• Electronic hardware upgrade from Series-III or IV to Series-VI
• Commissioning & best practices
• Data analysis, Optimization of USM setting and tools to be used
• Troubleshooting and fault analysis
• Firmware and hardware upgrade
  

Notes

• Satety footwear is required
• A laptop with administrations rights is required (installation of the current Sonic explorer & enSuite softwares)

Target Group

Service technicians, Measurement engineer, Technical specialist.

Precondition
Participation in USM I seminar and experiance in Q.Sonic trouble shooting

Training: on request

Measurement-IQ for Gas

Aim
In this 1-day seminar, participants get to know the functions and applications of MIQ and learn how to configure and perform data evaluation. You will be able to leverage the Power of Connected, to use MIQ's real- time, round-the-clock CBM to cut the costs of lost and unaccounted for gas, anticipate problems before they occur while keeping the measurement uncertainty to a minimum. 

Contents

• Introduction: Architecture and functions
• Design and interface of MIQ
• Setting of parameters
• Communication setup
• Reference setup
• Maintenance and Diagnostic

Target Group
Service technicians, Measurement engineer 

Training: On-site and remote training on request

Industrial Gas Flow Computer enCore FC1

Aim
In this 2-day seminar, participants learn the application and configuration options of enCore FC1 Flowcomputers with integrated registration.

Parameterizations are carried out using the enSuite software in the so-called “normal mode”.

Comprehensive practical exercises are intended to facilitate use of the encore FC1 with different I/O process connections and various components and simulations.

New developments and regulations are currently being communicated. 

Contents

• Introduction, overview and features of network connection
• Functioning of the FC1
• Online/Offline parameterization
• Application and parameterization of FC1
• Installation and use of the enSuite software
  
  

Notes
It is a good idea to bring a notebook laptop with administrator rights to install the most recent parameterization software (enSuite)

On request, we can cover the applications in "expert mode" in specially designed seminars.

Target Group
Users who are already familiar with volume conversion devices and who wish to use the enCore FC1 in the future.

Training on request

Gas Quality Analyzer EnCal 3000

Aim
In this 2-day seminar, participants get to know the functions and possible applications of EnCal3000 Gas Analyzers and learn how to independently evaluate chromatograms and a how to perform a basic calibration and an error analysis. So you are prepared to support official calibration measures and to independently optimize your processes and analyze errors. 

Contents

• Design and type of action of PGC EnCal 3000 natural gas and biogas
• Design and structure of the RGC3000 application
• software
• Operating the gas-net EnCal 3000 evaluation unit
• Setting of parameters
• Carrying out a calibration
• Connecting and measuring test gases
• Connecting the evaluation unit
• Questions and idease

Notes
Safety footwear and a laptop with administrator rights are required (installation of the parameterization software)..

Target Group
Service technicians and auditors who carry out tests and function checks of the EnCal 3000.

Training on request

Gas Quality Analyzer EnCal proChain

Aim
In this 2-day seminar, participants get to know the functions and possible applications of EnCal3000 prochain Gas Analyzers and learn how to evaluate chromatograms and a how to perform a basic calibration and an error analysis. So you are prepared to support official calibration measures and to independently optimize your processes and analyze errors. 

Contents

• Design and type of action of PGC EnCal proChain for natural gas C6
• Design and structure of the enSuite parameterization software
• Setting of parameters
• Carrying out a calibration
• Connecting and measuring test gases
• Connecting the evaluation unit
• Questions and ideas
  

Notes
Safety footwear and a laptop with administrator rights are required (installation of the enSuite software).

Target Group
Service technicians and auditors who carry out tests and function checks of the EnCal 3000 proChain.

Training on request

Gas Quality Analyzer gaslab Q2

Aim
This one-day seminar is intended for service technicians and auditors who carry out or assist tests and function checks of the Gas-Lab Q2. Participants get to know the evaluation of process values, carrying out service calibration and test runs and learn how to perform a fault analysis on the device. 

Contents

• Design and type of action of Gas-Lab Q2
• Design and structure of the Q2 application software enSuite
• Evaluation of source values
• Operating the Q2 display unit
• Setting of parameters
• Carrying out a calibration
• Connecting and measuring test gases
• Connecting the evaluation unit
• Troubleshooting

Notes

• Safety footwear is required
• A laptop with administrations rights is required (installation of the current enSuite software).

Target Group
Service technician.

Training on request